©2019 by EBPack. Proudly created with Wix.com

BRAUSSE 1450SE 
Automatic Flatbed Diecutting & Creasing Machine with Stripping Station

 

FEEDER

  • Preloading device mounted at the front of the feeder.

  • Non-stop feeder with automatic pile lift.

  • Suction head with several adjustment possibilities to handle a different kind of materials.

  • Two turbo blowers for positive separation of thin paper.

  • Motorized side adjustment of pallet table.

  • Pile adjustment during production.

  • Electrical double sheet control.

  • Fine air blast at the lead edge for smooth thin paper transport.

  • Sheet slow down device of feeder belts to assure accurate position of the sheet to the front lays.

  • Synchronizing device to adjust the sheet positioning to the front lay by hand during production.

  • Side lays on both sides adjustable for push and pull.

  • Electronic side lay control.

  • Four separate adjustable front lays with clock readout system at the operation outside of the machine.

  • Two electronic front-lay controls by means of Omron fibre optic sensors.

  • Safety devise for lowering of pallet carrier.

DIE-CUTTING SECTION

  • Indication of die-cutting pressure by means of a digital readout device.

  • Cam-driven gripper opener at die-cutting section entrance.

  • Pneumatic system for locking the die chase frame.

  • Motorized pressure adjustment system.

  • Torque limit safety clutch for main chain drive.

  • Air Blowing device for stabilising thin paper after arriving in the die section.
     

STRIPPING SECTION

  • Triple action movement of the upper and lower stripping tools.

  • Movement of the upper chase can be switched on and off electrically.

  • By means of remote control under the stripping device, the upper chase can be moved up and down electrically to ensure a simple adjustment of the lower pins.

  • The under stripping movement can be switched off mechanically.

DELIVERY SECTION

  • Automatic non-stop delivery with curtain, This curtain moves into the delivery to catch the stripped sheets during the exchange of the piles.

  • Blowing device to press down the sheets by means of adjustable bars.

  • Back and side joggers adjustable.

  • Gripper edge removing system with a transport belt to remove the gripper edge sideways to the drive side.

  • Tape inserter with counter.

  • Safety devise on lowering of the steel plate.