©2019 by EBPack. Proudly created with Wix.com

BRAUSSE 1050E
Automatic Flatbed Diecutting & Creasing Machine 

 

FEEDER

  • Patent turbo spiral air blower pressing foot at feeder head.

  • Four pick up and four forward suck heads with angle adjustment.

  • Preloading device with rail cart and scaled gate.

  • Non – stop feeder with automatic pile lift.

  • Left and right side turbo air blower.

  • Motorized side adjustment of pallet table.

  • Electrical double sheet control.

  • Fine air blast at the lead edge for smooth thin paper transport.

  • Sheet slow down device of feeder belts to assure an accurate position of the sheet to the front lays with selective on/off switch.

  • Synchronizing device to adjust the sheet positioning to the front lay by hand during production.

  • Bullet catcher on the feeder entrance.

  • Side lays on both sides push and pull convertible.

  • Electronic side lay control to check the sheet position.

  • Four individually adjustable front lays with dial read out at the operation side of the machine.

  • Two electronic front-lay controls by means of Omron Glasfiber Optik to control the sheet arrival.

  • Photo sensor safety barrier at pallet table floor level touching point.

DIE-CUTTING SECTION

  • Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement.

  • Precision stationery upper platen.

  • Sandwich hardened cutting plate.

  • Pneumatic push-button diechase locking mechanism to ensure safe and operator-friendly changing of the die.

  • Pneumatic clutch/brake for main drive system.

  • Servo motor drive impression on/off by push-button.

  • Digital die-cutting pressure tonnage display with maximum pressure limit protection.

  • Seven high precision alloy gripper bar.

  • High-quality pre-stretched gripper bar driving chain.

  • State-of-art 3 cam index gripper bar driving system to ensure smooth and precise gripper bar intermittent movement.

  • Torque limit safety clutch to protect the index driving system in case of gripper bar crash.

  • Double cam-driven gripper opener and front lay swing frame without position restore spring for smooth and accurate sheet register and take off.

  • Air blasting nozzle bar for stretching the thin paper before die-cutting.
     

DELIVERY SECTION

  • Automatic delivery with non-stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.

  • Five section brush brake each section angle adjustable individually.

  • Air blower to press down the sheets.

  • Rare and side joggers with easy position adjustment.

  • Tape inserter with counter.

  • Safety device to prevent the steel pile plate from clamping on the foot when it reaches ground level.